Driving Safely: How to Fix a Side Mirror on a Car That Fell Off

how to fix a side mirror on a car that fell off

How to Fix a Side Mirror on a Car That Fell Off

Firstly, gather the necessary materials for the task. You’ll need a replacement mirror (if the original one is damaged), automotive adhesive or double-sided tape, and any tools required for removing the broken parts or accessing the mounting area.

Next, carefully remove any remaining pieces of the old mirror from the mounting bracket. Clean both the bracket and the back of the new mirror thoroughly to ensure proper adhesion.

Apply a generous amount of automotive adhesive or double-sided tape onto the back of the replacement mirror. Make sure to follow any specific instructions provided by the manufacturer regarding application time and curing process.

Align the mirror with the mounting bracket on your car and firmly press it against it. Hold it in place for a few minutes to allow sufficient bonding between the two surfaces.

Removing The Broken Mirror

Removing The Broken Mirror

So, you’re facing the frustrating situation of a side mirror that has fallen off your car. Don’t worry, I’m here to guide you through the process of fixing it. The first step is removing the broken mirror safely and efficiently.

To start, gather the necessary tools such as a screwdriver, pliers, and protective gloves. Once you have everything ready, follow these steps:

  1. Locate and remove any screws or bolts: Inspect the base of the mirror where it attaches to your car’s door panel. Look for any visible screws or bolts holding it in place. Use your screwdriver or appropriate tool to carefully remove them.
  2. Release any clips or fasteners: Some mirrors may also be secured with clips or fasteners instead of screws or bolts. Gently pry them open using a flathead screwdriver or pliers while being cautious not to damage surrounding parts.
  3. Disconnect electrical connections: If your side mirror is equipped with electrical features like heating elements or turn signals, there will be electrical connections that need to be disconnected before removing the mirror completely. Refer to your vehicle’s manual for specific instructions on how to disconnect these connections properly.
  4. Detach the broken mirror: With all screws, bolts, clips, and electrical connections removed, carefully pull away the broken mirror from its housing on your car’s door panel.

Disconnecting The Electrical Connections

If your side mirror has electrical connections that need to be disconnected before removing the mirror itself, follow these steps:

  1. Turn off the power: To avoid any electrical mishaps, make sure your vehicle is turned off completely.
  2. Locate the electrical connections: The location of these connections may vary depending on your car’s make and model but they are usually located behind a small access panel on the inside of your door.
  3. Disconnect carefully: Using caution, unplug each electrical connection by gently pressing down on the release tab or squeezing the connector while pulling it apart. Take note of their positions for easy reconnection later.

Installing The New Side Mirror

Attaching The New Side Mirror

Now that you’ve prepared everything, it’s time to attach your new side mirror securely. Follow these steps:

  1. Aligning the mirror: Position the replacement side mirror in its designated spot, making sure it aligns perfectly with any existing holes or brackets on your car door.
  2. Securing with screws: If your replacement side mirror requires screws for attachment, carefully insert them through any pre-drilled holes in both sides of the mirror mount and tighten them using a screwdriver or socket set.
  3. Using adhesive/mounting clips: In some cases, adhesive or mounting clips are used instead of screws for attachment. Refer to your specific replacement side mirror instructions to determine which method is appropriate for your vehicle model.
  4. Double-check alignment: Once attached, verify that the new side mirror is properly aligned and adjusted to your desired position. Ensure it offers a clear view of the surroundings when seated in the driver’s seat.

Testing The Functionality

After successfully installing the new side mirror, it’s crucial to test its functionality before hitting the road. Here are some steps to help you ensure everything is in working order:

  1. Adjusting the mirror: Make use of any adjustment options available on your replacement side mirror to fine-tune its positioning. Confirm that you can easily see vehicles and objects in both close proximity and at a distance.
  2. Testing various angles: Sit inside your car and test the visibility from different angles while adjusting your mirrors accordingly. This will enable you to spot any blind spots or potential obstructions more effectively.
  3. Operating power mirrors (if applicable): If your vehicle is equipped with power-operated side mirrors, check if they respond correctly when using their respective controls inside the car. Ensure they can be adjusted smoothly without any unusual noises or resistance.


In conclusion, fixing a side mirror on a car that has fallen off can be a relatively straightforward task..Remember, if you’re unsure about any step in this process or encounter unexpected difficulties, it’s always best to consult with a professional mechanic or seek assistance from an automotive expert to avoid causing further damage.